Mushkin SOURCE 2 - 2TB Solid State Drive
Specifications
GENERAL | |
| Brand | Mushkin Enhanced |
| Series | Source 2 |
| Model | MKNSSDS22TB |
| Type | 7mm Internal Solid State Drive (SSD) |
| Used For | Consumer |
| UPC | |
PHYSICAL | |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Memory Components | 3D TLC |
| Interface | SATA 6Gb/s |
| Controller | Silicon Motion SM2259XT |
| Height | 7mm |
| Width | 69.85mm |
| Depth | 100.45mm |
| Weight | 50g |
PERFORMANCE | |
| Max Sequential Read | Up to 560MB/s |
| Max Sequential Write | Up to 515MB/s |
| 4KB Random Read | Up to 75,000 |
| 4KB Random Write | Up to 75,000 |
| Seek Time | <0.1ms |
| TBW | 600 |
| MTBF | 1,500,000 hours |
FEATURES | |
| MEDS (Mushkin Enhanced Data-protection Suite) ensures valuable data is protected | |
| - Built-in LDPC ECC provides the most-powerful error correction method in use today | |
| - Internal flash RAID provides additional error correction capability | |
| - Data shaping increases endurance | |
| - StaticDataRefresh ensures data integrity | |
| - Global wear-leveling evens program/erase counts across data blocks to extend lifespan | |
| SLC caching accelerates burst performance | |
| Device Sleep mode (DEVSLP) supported | |
| Supports Security Erase | |
| TRIM support (OS/driver support required) | |
| High-reliability 3D TLC NAND flash | |
| S.M.A.R.T. support | |
| User-upgradeable firmware | |
| Temperature sensor | |
| RoHS, FCC, CE | |
| Power Consumption (Idle): 0.08W | |
| Power Consumption (Active): 2W | |
| Max sequential speeds and IOPS measured using CrystalDiskMark 6.0.2 x64 | |
ENVIRONMENTAL | |
| Operating Temperature | 0°C-70°C |
| Storage Temperature | -40°C-85°C |
| Max Shock Resistance | 1500G |
| Power Supply | 5V DC |